The 10 best end mills for wood

Finding the best end mills for wood suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Product Features Editor's score Go to site
JERRAY UP/DOWN Tools Made HRC55 Solid Carbide, 2 Flutes Compression Wood End Mill router bits,1/4 JERRAY UP/DOWN Tools Made HRC55 Solid Carbide, 2 Flutes Compression Wood End Mill router bits,1/4"shank,1/4"cut diameter,1"cutting length,2"Overall length
Go to amazon.com
In-tool-home 1/8 In-tool-home 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"high Speed Steel HSS 4 Flute Straight End Mill Cutter Set of 6
Go to amazon.com
Lakeland Mills Cedar Log End Table, Natural Lakeland Mills Cedar Log End Table, Natural
Go to amazon.com
10 pcs 4-Flute End Mill Bits, AFUNTA 0.08 10 pcs 4-Flute End Mill Bits, AFUNTA 0.08" - 0.47" HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium
Go to amazon.com
8Pcs End Mill Bits, Drillpro HSS CNC End Mill Cutter Drill Bits for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set 1/16 8Pcs End Mill Bits, Drillpro HSS CNC End Mill Cutter Drill Bits for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set 1/16" - 1/2"
Go to amazon.com
EnPoint CNC Router Bit, Solid Carbide Spiral Multi-Helix Square Bottom 4-Flute End Mill 1/8 EnPoint CNC Router Bit, Solid Carbide Spiral Multi-Helix Square Bottom 4-Flute End Mill 1/8" 3.175mm Shank 1/8" Cut Dia 32mm Flute Length Woodworking Milling Router Bit for PCB Plastic Wood
Go to amazon.com
In-tool-home 1/4 In-tool-home 1/4" X 1/4" HSS 4 Flute Straight End Mills Cutter Drill Bit Pack of 2
Go to amazon.com
Wokesi 1/4''1/4''SHANK3-1/16''OAL,Extra Long,4Flute,High Speed Steel Full Grinded,Sqaure End Mill Cutter,CNC Router Bits Milling Slotting Cutting Tools (1/4''1/4''SHK3-1/16''OAL 4F) Wokesi 1/4''1/4''SHANK3-1/16''OAL,Extra Long,4Flute,High Speed Steel Full Grinded,Sqaure End Mill Cutter,CNC Router Bits Milling Slotting Cutting Tools (1/4''1/4''SHK3-1/16''OAL 4F)
Go to amazon.com
HOZLY UP & DOWN Cut 3.175x17mm Two Flutes Spiral Carbide Tool For CNC Router Compression Wood End Mill Cutter Bits Pack of 5 HOZLY UP & DOWN Cut 3.175x17mm Two Flutes Spiral Carbide Tool For CNC Router Compression Wood End Mill Cutter Bits Pack of 5
Go to amazon.com
Drillpro 10Pcs 0.8-3 mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Set Tool PCB Mould Plastic Fiber Carbon Fiber Hardwood, 1/8'' Shank Drillpro 10Pcs 0.8-3 mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Set Tool PCB Mould Plastic Fiber Carbon Fiber Hardwood, 1/8'' Shank
Go to amazon.com
Related posts:

Reviews

1. JERRAY UP/DOWN Tools Made HRC55 Solid Carbide, 2 Flutes Compression Wood End Mill router bits,1/4"shank,1/4"cut diameter,1"cutting length,2"Overall length

Feature

Made In the China HRC 55 1/4 Shank diameter 1" Length of Cut 2"Overall Length 2 Flutes

Description


Type: UP/DOWN Mills
Shank Diameter:1/4"
Cutting Diam: 1/4"
Flutes length:1"
Overall Length: 2"
Work Material Hardness: HRC55 Industrial Quality Router Bits
Number of Flute: 2F
Suitable Materials:
(1) MDF, particle board, board with lagging, log, affixed to the skin panels;
(2) Acrylic, PVC, resin, plastic, chipboard, composite board, melamine board;
(3) Solid wood, native wood, plywood, lotus plate;

2. In-tool-home 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"high Speed Steel HSS 4 Flute Straight End Mill Cutter Set of 6

Feature

Product Name : End Mill;Material : HSS
Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2"
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.

Description

Product Name : End Mill;Material : HSS
Color : Gray
01:1/2"x1/2",Cutting Diameter:1/2", Cutting Depth:1.57", Shank Diameter:1/2"
02:1/4"x1/4",Cutting Diameter:1/4",Cutting Depth:1",Shank Diameter:1/4"
03:3/8"x3/8",Cutting Diameter:3/8",Cutting Depth:/1.7",Shank Diameter:3/8"
04:3/16"x1/4",Cutting Diameter:3/16",Cutting Depth:4/5",Shank Diameter:1/4"
05:5/16"x5/16",Cutting Diameter:5/16",Cutting Depth:1",Shank Diameter:5/16"
06:1/8"x1/4",Cutting Diameter:1/8",Cutting Depth:3/4",Shank Diameter:1/4"
Suit for: HRC: 45 degrees Helix Angle 30 degrees
4 Flute End Mill Cutter
Package Content : 6 x End Mill

Usage:
--End Mill Bits are used for side milling, end milling, finish machining, etc.
--Apply to wood, steel, stainless steel, alloy steel, carbon steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
Why Choose AUTOTOOLHOME
-- Good quality and reliable brand.
-- Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund.
-- 24-hour feedback excellent customer service.

3. Lakeland Mills Cedar Log End Table, Natural

Feature

The legs and spreaders are made of insect and weather resistant white cedar, but the top is pine.
Made from a renewable resource and byproduct of the log home industry

Description

Lakeland mills cedar log end table goes well with any cedar log seating piece, especially the lounge chair or the rocking chair. In inexpensive way to add versatility to your lakeland mills furniture collection.

4. 10 pcs 4-Flute End Mill Bits, AFUNTA 0.08" - 0.47" HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium

Feature

APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.
HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency.
U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
MATERIAL: high speed steel, high hardness, good wear resistance and durability.
10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in

Description

Notice:
- Stop immediately in the processing of anomalies when using the end mill bits and find out the reason before processing.
- Pay attention to the condition of wear and tear of the cutting edge and timely repair the end mill bits.
- Cleaning the end mill bits and use oil after using, keep end mill bits properly.

Application:
- End Mill Bits are used for side milling, end milling, finish machining, etc.
- Apply to wood, steel, stainless steel, alloy steel, carbon steel, die steel, tool steel, cast iron, titanium, aluminum, etc.

Specifications:
Product Name: End Mill Bits
Material: HSS
Flute: 4 Flute End Mill Bits
Cutting Diameter: 2mm/0.08in, 3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in, 7mm/0.27in,
8mm/0.31in, 9mm/0.35in, 10mm/0.39in, 12mm/0.47in

Packing List:
10 x End Mill Bits

5. 8Pcs End Mill Bits, Drillpro HSS CNC End Mill Cutter Drill Bits for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set 1/16" - 1/2"

Feature

HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32with high speed, reduce changing times and improve the production efficiency.
CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
One Set of end mill bits Including: 8 Different kinds of Size end mills to meet your need, 1/16" =2mm, 1/8"=3mm, 5/32''=4mm, 3/16"=5mm, 1/4"=6mm, 5/16"=8mm, 3/8"=10mm, 1/2"=12mm
STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.

Description

Drillpro 8Pcs HSS CNC 4 Flute End Mill Cutter Drill Bits
Notice: In order to adapt to the universal size of the world, this product is printed on the metric system
1/16" =2mm, 1/8"=3mm, 5/32''=4mm, 3/16"=5mm, 1/4"=6mm, 5/16"8mm, 3/8"=10mm, 1/2"=12mm


Specification:
Product Name: End Mill Bits
Material: HSS
Granularity: 0.6um
HRC: 45 degrees
Helix Angle: 30 degrees
Flute: 4 Flute End Mill Bits
Cutting Diameter: 1/16" =2mm, 1/8"=3mm, 5/32''=4mm, 3/16"=5mm, 1/4"=6mm, 5/16"=8mm, 3/8"=10mm, 1/2"=12mm
Package Included: 8 x End Mill Bits

Usage:
End Mill Bits are used for side milling, end milling, finish machining, etc.
Apply to wood, steel, stainless steel, alloy steel, carbon steel, die steel, tool steel, cast iron, titanium, aluminum, etc.

Instructions:
Before installing the end mill bits, you should first use the cleaning fluid to clean the end mill bits holder and the holder hole, dry them and then install.
When the diameter of the end mill bits comes longer, in order to avoid the accidental removal of the end mill bits, it should be used with a flat cut notched handle and the corresponding side locking way to install.
If the tool holder is used for a very long time, it will easily cause end mill bits to break off from the tool holder. In this case, replace the new tool holder.

Notes:
Stop immediately in the processing of anomalies when using the end mill bits and find out the reason before processing;
Pay attention to the condition of wear and tear of the cutting edge and timely repair the end mill bits;
Cleaning the end mill bits and use oil after using, keep end mill bits properly.

Why Choose Drillpro
Good quality and reliable brand.
Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund.
24-hour feedback excellent customer service.

6. EnPoint CNC Router Bit, Solid Carbide Spiral Multi-Helix Square Bottom 4-Flute End Mill 1/8" 3.175mm Shank 1/8" Cut Dia 32mm Flute Length Woodworking Milling Router Bit for PCB Plastic Wood

Feature

4 Flute Up-Cut: unique variable design for faster speeds and feeds provides quiet operation & better finish, the superstars of carbide end mills for professionals and hobbyists alike
Multiple helix eliminates harmonic chatter, critical when surface finishes, outstanding tools for peripheral milling, and can take aggressive cuts along the full length of the overall flute length with no issues
Produced from a Premium, Ultra-Fine, Nano Grade Solid Carbide for maximum tool strength and durability, extremely sharp cutting edge produces an excellent surface finish when cutting Plastic and Wood
For use with manual and automatic milling machines, as well as the most sophisticated CNC machines
It's mainly used to cut, machine and mill Aluminum, Plastic, Wood, Acrylic, Solid Wood Panels, Medium Density Fiberboard, Corlor Plates, and Partical Board etc.

Description

Specifications
Product Type: 4 flutes end mill
Material: solid carbide
Shank Diameter: 3.175mm(1/8 inch)
Cutter Diameter: 3.175mm(1/8 inch)
Flute Length: 32mm(1.26 inch)
Overall Length: 60mm(2.36 inches)
Application: It is mainly used for the milling and cutting of Aluminum, Acrylic, Medium Density Fiberboard, Corlor Plates, Solid Wood Panels, Partical Board and PVC etc.

7. In-tool-home 1/4" X 1/4" HSS 4 Flute Straight End Mills Cutter Drill Bit Pack of 2

Feature

HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32with high speed, reduce changing times and improve the production efficiency.
APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
Package Content : 2 x 1/4 inch End Mill

Description

Product Name : End Mill;Material : HSS
Color : Gray
1/4x1/4; Cutting Diameter:1/4''; Cutting Depth:1'' ; Shank Diameter:1/4'';
Suit for: Hardness of metal for above 30 degrees
4 Flute End Mill Cutter
Package Content : 2 x End Mills

8. Wokesi 1/4''1/4''SHANK3-1/16''OAL,Extra Long,4Flute,High Speed Steel Full Grinded,Sqaure End Mill Cutter,CNC Router Bits Milling Slotting Cutting Tools (1/4''1/4''SHK3-1/16''OAL 4F)

Feature

4 Flute,Cutting diameter=1/4'',Shank diameter=1/4'',Flutes length=1-1/4'',Overall Length=3-1/16''.
Material:M2AI,High Speed Steel,long tool life.Extra long blade for deep cavity machining.
Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc(under HRC32(HRA66)).
Full grinded,4 Flute,high abrasion resistance,obtain accuracy and fine finish.
Package:1pcend mill cutter

Description

1.Widely used in hardness from aluminium,cast iron,brass,copper,magnesium alioy,plastics under HRC32(HRA66),or more processing soft materials.
2.4 Flute cutter:suitable for plane processing:3 Flute cutter:most suitable for aluminium processing;2 Flute cutter:most suitable for machining keyway.
3.Full grinded cutter offer obtain accuracy and fine finish than other substrates.
4.Make sure work piece and machine are stable,use hydraulic chucks,high quality collet chucks,or shrink fit chucks.
5.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
6.Tool overhang,please use the required amount of minimum size,amount of long overhang is high vibration,turn it to lower the number of feed.
7.Adapt to several kinds of cooling conditions,for example oil mist,air cooling.

9. HOZLY UP & DOWN Cut 3.175x17mm Two Flutes Spiral Carbide Tool For CNC Router Compression Wood End Mill Cutter Bits Pack of 5

Feature

Excellent edge-grinding technology.
Without sticking, smokeless, odorless and silent during processing.
Long service life, not easy to break.

Description

Description:
(1) Brand: RD;
(2) Type: UP & DOWN Cut Two Flutes Spiral Solid Carbide Endmills;
(3) Made of: High-quality IMPORTED Micro Grain Tungsten Steel Solid Carbide;
(4) Shank Diameter: 3.175mm
(5) Cutting Edge Diameter: 3.175mm
(6) Cutting Length: 17mm;
(7) Overall Length: 38mm;
Suitable Materials:
Cutting, milling on:
(1) MDF, particle board, board with lagging, log, affixed to the skin panels;
(2) Acrylic, PVC, resin, plastic, chipboard, composite board, melamine board;
(3) Solid wood, native wood, plywood, lotus plate;
Applied to:
CNC Router Machining Center, Woodworking Machine, Advertising CNC Router, etc;
Features:
(1) Excellent combination of upper and lower blades, SHARP cutting edge;
(2) High precision grinded and polished, high abrasion resistance and temperature resistance, good rigidity, not easy to break;
(3) No burrs for Up and down spiral machining;
(4) High performance-to-price ratio, improve the work efficiency, reduce cost;
Specification / Available Sizes:
(1) Name: 2 Flutes Compression Cutters;
(2) Available Sizes (unit: mm): 3.175mm
CED: Cutting Edge Diameter;
CEL: Cutting Edge Length;
OVL: Overall Length;
Package: 5 Pieces/Lot
Condition: Brand-new & Good quality!

10. Drillpro 10Pcs 0.8-3 mm Titanium Coat Carbide End Mill Engraving Bits CNC Rotary Burrs Set Tool PCB Mould Plastic Fiber Carbon Fiber Hardwood, 1/8'' Shank

Feature

Use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency.
High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
Cutting Edge Diameter: 0.8-3.0 mm( 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 3.17 mm)
Cutting Edge Length: 12mm. Overall Length: 37mm. Quantity: 1set (10 pcs)

Description

Specification:
Material: Cemented carbide
Shank Diameter: 3.175mm
Cutting Edge Diameter: 0.8-3.0mm( 0.8,1.0,1.2,1.4,1.6,1.8,2.0,2.2,2.4,3.0mm)
Cutting Edge Length: 12mm
Overall Length: 37mm
Quantity: 1set (10pcs)

Guaranty: Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund.

Features:
use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency;
have sufficient bending strength and wear resistance; High hardness, high wear resistance, high strength;
sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.

Application:
PCB, SMT, CNC, Mould, plastic fiber, carbon fiber, super hard wood, printed circuit board, other precision parts processing.

Package include:
10pcs PCB Drill Bit Engraving Mill Cutter

Conclusion

All above are our suggestions for end mills for wood. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using end mills for wood with us by comment in this post. Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *